Can’t Connect Host Router to WiFi Repeater with Ethernet?
In order to complete the WiFi repeater setup process, the basic requirement is to connect the router to the repeater. However, in case you are unable to connect host router to WiFi repeater with Ethernet cable, then you have landed on the right post. Here, we have talked about how you can resolve this issue in the blink of an eye. Taking this into consideration, walk through the topmost solutions mentioned in this blog post.
How to Connect Router to WiFi Repeater with Ethernet?
1. Use a Damage-Free Ethernet Cable
Check the Ethernet cable through which you are trying to connect the router to the WiFi repeater. In case it has any cuts on or in it, then it is recommended that you tape up the cable now. However, if this does not bear fruit for you, then purchase a new Ethernet cable for the establishment of a fresh connection between the networking devices.
To connect the devices, you need to connect one end of the cable to one port of the repeater and another to one port of the router. Make sure that you are not establishing a finger-tight connection between them. Otherwise, even using a new Ethernet cable will go in vain. Chances are that you might get stuck with more technical issues in the future.
2. Reduce the Distance Separating Devices
Another thing that you can do to resolve the issue at hand is to reduce the distance between the repeater and the host router. Ensure that it is neither too much nor less. The reason being, too much distance between the devices can make it very difficult for their signals to get transmitted throughout the house. And too less distance can force their signals to clash. Thus, at all costs, maintain a safe distance between the networking devices. If you want to gain knowledge as to how much distance should be maintained between then in numbers, then waste no more time referring to the information given in the user manual.
3. Put a Long Ethernet Cable to Use
The whole reason why users prefer to connect host router to WiFi repeater with Ethernet cable is because it a more reliable source of connection as compared to a wireless source. In a WiFi connection, the WiFi can drop at any hour of the day thereby causing issues stopping one from browsing, binge watching, listening music, and doing other online tasks.
Taking this into consideration, if the Ethernet cable is short, it might cause the WiFi to drop as well by disconnecting from the devices again and again. Thus, make sure that the cable you are using is long enough to make the repeater and router stay connected. In case, in tip does not help you out either; go to the next one in line.
4. Restart the Wireless Repeater
Chances are that there is nothing wrong with the cable or the distance between the devices due to which you are unable to connect host router to WiFi repeater with Ethernet cable. Maybe there is something wrong with the repeater itself. In view of this, restart the repeater. This will give the device a chance to start fresh. In order to restart your networking device, you need to press the power button on it, unplug it from its wall socket, count to 30, plug the repeater back into its wall socket, and at last, turn on the router. Now, try to connect host router to WiFi repeater with Ethernet cable. See if this time you get any luck in connecting your networking devices easily.
The Bottom Line
This ends our guide written on how to connect host router to WiFi repeater with Ethernet cable without facing any issues. Hopefully, you will be able to connect the networking devices in a hassle-free manner now. If you do, then it is recommended that you connect your client devices to the network of the repeater and enjoy a blazing-fast and seamless internet connection on them. Also, if you are scared that you might experience the same issue in the future, bookmark this post so that whenever the odds are not in your favor, then you can simply open it and refer to the troubleshooting tips given.