Complete Guide to Setup Victony WiFi Extender Model US 402

In this technological era, Victony extenders are used to enhance the internet speed to provide connectivity in low signal areas or dead zones. Almost everyone around the world prefers it as it offers a fast-blazing speed of internet connection. This article covers the complete step-by-step procedure to set up the Victony WiFi extender model US 402.  So, we highly recommend you go through this write-up without missing any points. The influencing points related to the setup are mentioned in the upcoming passages. Read on!

First, we would like to tell you about some important necessities related to the Victony WiFi extender setup that you need to prepare just before the procedure.

Prerequisites: Victony WiFi Extender Model US 402 Setup

There are many things that you should prepare before the configuration of the Victony WiFi extender. Below we’ve mentioned all of them:

• Need of sufficient power supply.
• A good and constant internet connection from the ISP side.
• Suitable place for the placement of the extender.
• Quality Ethernet cable.
• Updated internet browser.
• The default web address of the Victony extender.
• Note down the default admin details (Username and Password)
• Computer and laptop.

Hence, these are the things that you need to get prepared for just before the configuration of the Victony WiFi extender model US 402. Once you prepare the entire important requirement, you will be ready to perform the setup. Now, let’s move to the methods to install the extender.

Configuration Methods

For your information, there are two methods that you can perform to install the Victony extender in your home hassle-free. The names of the procedures are the web interface and the WPS button. Both processes are very easy to perform. Below we discuss the methods in brief so that you can familiarize yourself with them.

Web Interface: In this method, you need to access the default web address of the device with the help of an updated internet browser. Plus, you can also call this procedure Victony WiFi extender manual method.

WPS Button: WPS button procedure is one of the best and easy processes to configure the Victony WiFi extender model US 402. You just need to find out the WPS button on the device. To know more, you need to read out the next section.

Now, you have a basic knowledge of both procedures. In the next sections, we highlighted the essential steps to perform the Victony WiFi extender setup.

Victony WiFi Extender Model US 402 Setup (Manually)

• First, you need to unbox the device properly.
• Give the power supply to the extender by plugging it into the electricity source.
• Connect the Extender to the router with an Ethernet cable.
• Open the internet browser on the computer or laptop.
• Enter the default web address of the extender into the URL bar.
• Press Enter key.
• Now, you will see the extender login panel.
• Fill the default admin details into the on-screen fields.
• Click on the Login Button.
• Victony WiFi extender setup wizard will appear.
• Now, you see the on-screen prompts which you need to follow to complete the setup.

Once you complete the instructions, you will get your device successfully installed. Now, move to the WPS button.

Victony WiFi Extender Model US 402 Setup (WPS Button)

• Initially, place the extender near the host router.
• Thereafter, power up the respective Victony extender by the plugin it into the power socket.
• Now, locate the WPS button on the extender as well as the router.
• Once you find out the WPS button on the devices, you need to press it for some seconds.
• After that, wait for some time until the extender is configured successfully.

Hence, these are the essential steps that you need to perform to install the Victony WiFi extender model US 402 in your house.

Tip: Once you set up the Victony extender in your home, you can enable the features of the extender by accessing the dashboard of the device. All the features are very unique and interesting to use and also enhance the internet experience.

Bottom Lines!

Now, you know the configuration methods of the Victony WiFi extender model US 402. You just need to perform one of them according to your convenience.

However, in case of any issue, you can contact us through email and our experts are always ready to help you out.